INCOLOY 825 (UNS N08825 / NS142)

For high-quality INCOLOY 825 (UNS N08825 / NS142) products, trust our factory. We specialize in manufacturing and delivering top-notch industrial materials.

Request a Quote
  • INCOLOY 825 (UNS N08825 / NS142)

PRODUCTS DETAILS

Alloy 825 is an austenitic nickel-iron-chromium alloy also defined by additions of molybdenum, copper and titanium. It was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.  Alloy 825 was developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing. With a nickel content range between 38%–46%, this grade exhibits pronounced resistance to stress corrosion cracking (SCC) induced by chlorides and alkalis. The nickel content is sufficient for resistance to chloride-ion stress-corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids. The chromium and molybdenum content also provides good pitting resistance in all environments except strongly oxidizing chloride solutions. Utilized as an effective material in a wide variety of process environments, alloy 825 maintains good mechanical properties from cryogenic temperatures up to 1,000° F. The addition of titanium stabilizes Alloy 825 against sensitization in the as- welded condition making the alloy resistant to intergranular attack after exposure to temperatures in a range that would sensitize unstabilized stainless steels. The fabrication of Alloy 825 is typical of nickel-base alloys, with material being readily formable and weldable by a variety of techniques. This material has excellent formability, typical of nickel-base alloys, allowing the material to be bent to extremely small radii. Annealing after bending is not normally necessary. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.ASTM B163, ASTM B423 , ASTM B704Alloy 825 (UNS N08825) Composition %
O.D O.D Toleracne W.T Tolerance
Inch mm %
1/8" +0.08/-0 +/-10
1/4" +/-0.10 +/-10
Up to 1/2" +/-0.13 +/-15
1/2" to 1-1/2" , excl +/-0.13 +/-10
1-1/2" to 3-1/2" , excl +/-0.25 +/-10
Note: The tolerance can be negotiated according to the customer's specific requirements
Ni Nickel Cu Copper Mo Molybdenum Fe Iron Mn Manganese C Carbon Si Silicon S Sulfur Cr Chromium Al Aluminum Ti Titanium
38.0-46.0 1.5-3.0 2.5-3.5 22.0 min 1.0 max 0.05 max 0.5 max 0.03 max 19.5-23.5 0.2 max 0.6-1.2
Maximum allowable pressure(unit: BAR)
Wall Thickness(mm)
    0.89 1.24 1.65 2.11 2.77 3.96 4.78
O.D(mm) 6.35 451 656 898 1161      
9.53 290 416 573 754 1013    
12.7 214 304 415 546 742    
19.05   198 267 349 470    
25.4   147 197 256 343 509 630
31.8   116 156 202 269 396 488
38.1     129 167 222 325 399
50.8     96 124 164 239 292
Mechanical Properties 
Yield Strength 35 Ksi min
Tensile Strength 85 Ksi min
Elongation(2" min) 30%
Hardness(Rockwell B Scale) 90 HRB max

Hot Products

Weld Fittings (Bright Annealed & Electropolished)

Weld Fittings (Bright Annealed & Electropolished)

SS904L AISI 904L Stainless Steel (UNS N08904)

SS904L AISI 904L Stainless Steel (UNS N08904)

Weld Fittings (Bright Annealed & Electropolished)

Weld Fittings (Bright Annealed & Electropolished)

Instrumentation Tube(Stainless Seamless)

Instrumentation Tube(Stainless Seamless)

Tube Fitting and Valves for Instrumentation

Tube Fitting and Valves for Instrumentation

Bright Annealed(BA) Seamless Tube

Bright Annealed(BA) Seamless Tube

Monel 400 Alloy (UNS N04400/ W.Nr. 2.4360 and 2.4361 )

Monel 400 Alloy (UNS N04400/ W.Nr. 2.4360 and 2.4361 )

HASTELLOY C276 (UNS N10276/W.Nr. 2.4819 )

HASTELLOY C276 (UNS N10276/W.Nr. 2.4819 )

Tube Fitting and Valves for Instrumentation

Tube Fitting and Valves for Instrumentation

INCONEL 600 (UNS N06600 /W.Nr. 2.4816  )

INCONEL 600 (UNS N06600 /W.Nr. 2.4816 )

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours